Select a grille, finish and brass frame style and we can manufacture to the exact measurements supplied.
Brass Tacks offer a bespoke frame making service. For more information call 0208 866 8664.
All of the grilles featured on this site can be fitted into a frame. Made from 1/8" (3mm) thick brass extrusion they are available in various different finishes. All corners are mitred and soldered and the frame highly polished. The following frames are available: T Section, Angle, Channel or Flat in the following sizes: 1/2", 3/4" or 1" (13mm, 19mm or 25mm). The images below show the 4 profiles available and a perforated grille fitted into a frame, all shown in satin brass finish.
Brass Frame – Flat Section
Brass Frame – T Section
Brass Frame with Perforated Grille
Perforated brass grille mounted in a T Section Brass Frame.
Brass Frame – Angle Section
Brass Frame – Channel Section
There are two designs of linear grilles, framed or unframed. Either grilles are offered with a choice of 3/4" x 1/8" (19 x 3mm) or 3/4" x 1/4" (19 x 6mm) bars. The bars can be spaced at either 1/4" (6 mm) or 3/8" (10mm). If required, the bars can be angled at 15 degrees to deflect the air flow. Framed grilles are manufactured using 3/4" x 1/8" (19 x 3mm) brass angle. All linears are available in a number of special finishes. As the linear grilles are made to order, if you require different spacing, bar size or frame size then please contact us.
Linear Brass Grille – 3mm
Linear brass grille with 3mm bars and 10mm spaces without frame.
Linear Brass Grille – 3mm Framed
Linear brass grille with 3mm bars and 10mm spaces with frame.
Linear Brass Grille – 6mm
Linear brass grille with 6mm bars and 6mm spaces without frame.
Linear Brass Grille – 6mm Framed
Linear brass grille with 6mm bars and 6mm spaces with frame.